Hi,At the central site I have two 2620 routers (Router A and B) with a ISDN BRI interface and share a single ISDN BRI line (both connected and active)and a single telephone number. I want these to act as active/standby using HSRP and whichever is the...
I am using NTP on my AS5200 and 3640's, but it isn't synching. Is there a way to force it to synch? Some of my routers are synching and some aren't. I have my routers set up w. the NTP server x.x.x.x pointing back to the main NTP server router. Do I ...
I have a general question about the enable password.The manual states that the "normal" enable level 1 will give "normal" EXEC privlages, however with no level stated the default will be 15 which is the "normal exec commands." I need to know technica...
Hello - Has anyone had experience with connecting an Alcatel OmniStack 5024 to a 6509?? My attempts have resulted in strangness... The 5024 shows a link and active however the 6509 has a dark (Not Amber) link light and status of Not connected. ...
Hi:I have a customer that are interesting to implementing a redundant CORE using 3 Catalyst 6500, in a triangle configuration.The customer will use HSRP and 15 vlans.The left switch is the master for all the vlans and run all the HSRP process.The rig...
When I updated my version of the Java2 Runtime Environment to version 1.3.1 the visual switch manager interface began prompting me for a password repeatedly. By reverting to an older version of Java2 located on CCO the problem was resolved. However...
We have a 2924XL that I need to change the configuration but we don't have the password. Can someone help us recover the PW or assign a new oneThanksCesar
Hey all, I have a situation where I was performing a Password Recovery on my switch, when I stupidly deleted the config.text file. Now I can't get it back or create a new one. Which prevents me from saving to NVRAM (Thats Bad!) When I try to save...
I have a 1720 on a small network (4 users on a hub). When the users try to get to the Internet through the router, they can not. The users can ping the router but not beyond the router. From the router, I can not ping the users. After I clear the ...
Hi, I've trouble in implementing "Callback Exec" usingauxilary port.Typically I'm getting "Callback initiated -line disconnected" phrase in my hyperterminal,but access server is not dialing out.I'm getting following "debug messages" and aline confi...
Before using CMS on 3524,I have configured my IE according to the guidelines .Such as security configuration etc.And I assigned an avaliable IP addr for the 3524.The symptom is that I can connect to the 3524 by IE,but I can not see more everytime I ...
