Hi AllI'm running a couple of stacks of 3750's and I am having a problem with the Software syncronisation feature. Basically, the sync does not work. When I add an additional switch, the systems detects the out-of-date sw-version and tries to replic...
We have a need to netboot a PC with Linux via a Cisco router (I.E. PXEboot).We have copied the PXE linux.cfg files to the Cisco router's flash, (Cisco 2821, IOS Advanced Security 15-1.2-T1).We have setup the router as a TFTP server with defaulted pat...
How can enable service-policy and traffic-shape on virtual-template in Cisco 3925 IOS c3900-universalk9-mz.SPA.150-1.M1.bin ipbase ?Record:policy-map test512 class class-default shape average 128000....interface Virtual-Template1 service-policy o...
I'm trying to upload an IOS upgrade for a Cisoc 1811 router via tftp through telnet. The upgrade isn't overly large (approx. 24 MB) but the connection to the tftp server keeps timing out in less than 5 minutes after connecting. The error I get in the...
I have a router with the following message "%ALIGN-1-FATAL: Corrupted program counterpc=0xB0D0B0D, ra=0x60F02F08, sp=0x61EEA5B8". The router reload two times, in 5 days.I also would like to now if there is any kind of cisco tool, avaiable for Cisco p...
Hi GuysI am posting this because I am starting my career into network design and want some help in it. I am at present in need of a high level design overview as I need to prepare some high level network design documents. Can anyone shower some thoug...
We have a PIX 515e. This has 2 built in ethernet interfaces. My requirement is to add an additional interface card to this device so that I can add a DMZ to my network.Below is the sh version output of my PIX:sh verCisco PIX Security Appliance Softwa...
Hi, I have two WS-X6148-GE-TX blades in a 6509-E chassis. Due to the limitations I have purchased two replacement WS-X6748-GE-TX blades, my question is, as they are the same types of blades (i.e. - both are 48 port RJ45 Gigabit interfaces) will it ju...
What is the best place / method to find documentation to ensure that a Cisco switch (WS-C3560 24PS) will fit correctly into an Ortronics Mighty-Mo telecom enclosure?**sorry for the poor quality of the attachment **
This appears over and over again in my log buffer (which is set to trap warnings thru alerts):*Jun 15 14:46:54.016: %APF-4-PROC_ACTION_FAILED: apf_wme_utils.c:3440 Could not process 802.11 Action. Received Action frame with invalid category field fro...
I have ten 2811 routers that won't pull DHCP address from a DSL or cable modem. If I plug in a laptop to the cable modem it pulls a DHCP address. Most of the sites have a static IP, but the cable modem company does not have static addresses, so two o...
Dear allI have two 6509 chassis with Sup720 and MSFC3.Additionally I have one module "CSM with SSL" WS-X6066-SLB-S-K9 Hw. 1.2, Sw. 2.2(1)and one module"SLB Application Processor Complex" WS-X6066-SLB-APC Hw. 1.6, Sw. 4.3(1)I am searching the Cisc...
