Other Network Architecture Subjects

I Installed the WUSB100 adapter under windows 7. The operating system recognised the adapter and gave a list of the available networks. But the connection was refused with error code 0x00038002 sub code 0x00000002. Does somebody knows what it means a...

Hi!I'm new in a company, previous technician  forgot secret on Cisco 851, so i've tried to recover it today. I've  connected to serial with PuTTy, turned of router for 10 seconds, turned  on, then i pressed break for 20-30 seconds. I couldn't get to ...

Hi everybody,I have this problem: I have two Cisco 1801 (RT1 AND RT2) with this IOS, c180x-advipservicesk9-mz.123-8.YI3A litte intro: the routers are on my desk, so not in production, not connected to other devices or ADSL pots. I'm connected through...

Hi there,We are currently rolling sticky macs out on our switches, however I was wondering if there is something we can put on the config of each interface that will auto shutdown a port if it isn't used after a set period of time? This will need les...

I want to upgrade my router's flash and RAM. I have several 2511s,2514s,2611s.1)Is MEM2600-8U16FS (16MB), as listed in the guide, a replacement for 8MB of existing Flash? Meaning, is it a replacement, or additional to the existing chip?2)Can I use t...

Hi there,I have a partner in Canada that is trying to add a Cisco 7206VXR to smartnet and we are trying to determine the true chassis serial number.  The end customer has provided us the sh invent which gives us the main processor board s/n, and they...

Who knows the specs for the memory for SUP III board in a catalyst 5505?I am looking for alternative (like cheaper) memory for my private caalyst used for study.Kind regards, Eric Sanders

Is it possible to use a PCMCIA flash memory card from a 65XX switch in a router?

I'm trying to determine if the fixed memory for the NPE-300 is any different then the configurable memory? I know it has to be 32MB, but I'm not sure if this is simply a 32MB SDRAM DIMM like the configurable memory. I had the configurable memory fo...

Can you increase the amount of memory in the 2611? If so how?

HiI'd be grateful if anyone could advise how I can find out what DRAM simms are in what slots on 2651s running a slightly venerable IOS (12.2(3d))The command sh c2600 shows the DRAM slot contents when run on the IOS we want to upgrade to, but not on ...

Long ago, I can remember there being a document that floated around Cisco with a list of Approved Vendors for Third-Party Memory that customers could use to upgrade their routers and such when it would take Cisco too long or too expensive to get the ...

Hi, currently my router is using 30% of memory, currently its running one 2Mb internet link. i am going to configure two more 2Mb link with one VPN on each link.So shall i increase the memory on my router ?regardsNeo