Other Network Architecture Subjects

Hello everyoneI have been unable to place a few switches in spanning-tree debug mode using the debug spanning-tree events. The command gets returned as invalid input in priviliged EXEC mode. In other modes it is retured as an unrecognized command. I ...

HelloI would like to know the max length of cabel to use beetwen two Card Multiflex G703Best regardsKheireddine.

Hello,When I click in topology services the next message appears (View attachment)What is the problem?ThanksBest regards

Hi folks,     I'm having this issue since I update the IOS from 12.4(9)T to 12.4(24)T2. So I tried 12.4(22)T, 12.4(20)T, 12.4(15)T. With every version the problem is always the same (reboots continuosly).Then I had back to 12.4(9)T and the router sta...

Recently, the company I work for upgraded the VPN circuit between our ISP from 10MB to 16MB.Latency has been reduced dramatically!  VoIP service has improved markedly.However, one of my collegues noticed that bandwidth utilization never exceeds 3MB. ...

Hi all, has anyone connected a FO using 10GB-SR and a XENPAK-10GB-LX4 gbic, could we have a problem if we do so for a cable distance of 80 to 120 meters.thks in advace.Mario

I'm working with a test environment... I need to delete all and changeip to move appliance to the client's site, but I don't know how to clean it.Regards.

Note sure if I am putting this query in the right location, so sorry in advance.I have four c2350 switches and for some reason two of them didn't seem to like to respond to SNMP request from our monitoring software (Cacti). So I did some testing on i...

HiDo I need a SMARTnet agreement for downlod of software or is it free?

Wasnt sure where to post this...was hoping somebody could point me in the right direction...anybody have any site, whitepaper, document of any kind that gives an outline of products and services comparison between cisco products and other network equ...

Only for my 2514 I have over 30 IOS versions I downloaded off the internet.They seem to be made by different people, as they claim "compiled by such and such"Who are those people? Folks like you and me? If that´s the case, what are the tools they use...

Hi,I am facing very strange connection problem with Access Server 2511 to my Router “r1” and when I connect to other devices like Router, it can connect and OPEN but I cannot get command prompt of this Router or when I try others devices the same pro...

Greetings, In the docs it indicates that you cannot have port security on a trunk port. I was wondering if this was absolutley true as I was wanting to secure some of our ip phone switch ports but alas they are trunk ports. I would appreciate any hel...

Dear Sir,We have configured static routes for dialer interfaces as"ip route 10.30.240.64 dialer0"Now irrespective of the dialer interface has any active call or not this route is always available in my routing table because show interface dialer0 sh...