Other Network Architecture Subjects

Note sure if I am putting this query in the right location, so sorry in advance.I have four c2350 switches and for some reason two of them didn't seem to like to respond to SNMP request from our monitoring software (Cacti). So I did some testing on i...

HiDo I need a SMARTnet agreement for downlod of software or is it free?

Wasnt sure where to post this...was hoping somebody could point me in the right direction...anybody have any site, whitepaper, document of any kind that gives an outline of products and services comparison between cisco products and other network equ...

Only for my 2514 I have over 30 IOS versions I downloaded off the internet.They seem to be made by different people, as they claim "compiled by such and such"Who are those people? Folks like you and me? If that´s the case, what are the tools they use...

Hi,I am facing very strange connection problem with Access Server 2511 to my Router “r1” and when I connect to other devices like Router, it can connect and OPEN but I cannot get command prompt of this Router or when I try others devices the same pro...

Greetings, In the docs it indicates that you cannot have port security on a trunk port. I was wondering if this was absolutley true as I was wanting to secure some of our ip phone switch ports but alas they are trunk ports. I would appreciate any hel...

Dear Sir,We have configured static routes for dialer interfaces as"ip route 10.30.240.64 dialer0"Now irrespective of the dialer interface has any active call or not this route is always available in my routing table because show interface dialer0 sh...

Welcome to the Cisco Networking Professionals Ask the Expert conversation. This is an opportunity to learn more about DDR and PPP on leased and dial line.with Cisco experts Tejal Patel. Tejal is a customer support engineer at the Technical Assistanc...

I have to discover one site at a time for about 20 remote sites, can someone let me know if this is the correct way to implement ... Thanks in advance.1) to configure my seed devices (site1) in Discovery Settings and submit a discovery. ----> ...

Hi,I have a 2 years old cisco 857W which shutdowns itself after a couple hours of being on and used.When it shutdowns, only the FastEthernet connected leds are lit, all the other leds are off.The console doesn't show anything.If I immediately turn it...

HiI am looking for adding QoS for GRE Tunnel and found this infoWhere Do I Apply the Service Policy?You can apply a service policy to either the tunnel interface or to the underlying physical interface. The decision of where to apply the policy depen...

I am looking to upgrade our aging 2500/2600/3600 routers with the 2801 router. One question that has come up is support for IMA circuits. Is the AIM-ATIM module compatiable with the 2801?With the dynamic configuration tool at Cisco, I cannot add a ...

Is it possible to create a port group that contains ports from multiple physical switches. We are using Catalyst 3500 series switches that are connected to a Catalyst 6509 running layer 3.