Other Network Architecture Subjects

Hi,Can anyone help me with the following question?I have a 6509 with the following Modules2 x 1000BaseX Supervisor (WS-X6k-SUP2-2GE)2 x WS-F6K-MSFC2 Multilayer Switch Feature CardMy question is in relation to moving from Hybrid mode to Native Mode.Ca...

I power cycled this switch and ever since then the unit comes up with an amber PS1 led indicator. All the documentation only mentions red for failed and green for ok. Nothing mentions amber.I can not ping the switch nor does it pass traffic. When ...

i want to analyse the traffic of ip packet from a lab source add via internet to distination add, include from arp in a local lan to routing icmp in the internet, i want to see the detail traffic trail, i m very distrust to this all o long time !who...

Hi , I have a remote router its coming in Rommon mode ? any helpregardsNeo

I plan to put a combination of 110v and 240v PSU for my cat4k.Can i do so?Is there any impact for such a combination?

Hello,I've read the "understanding MSTP article" from cisco's website and I have several uncertainties.These have deepened even more after performing several experiments.I've setup a test scenario with the following configuration:C1 Cisco PVST ---- ...

I have cisco 2950 with 21025K bytes of memory. still the memory in process cpu shows only 8 MB. Can someone help me in understanding this.

I have 3 services accessible from servers attached to a 3750 switch.Basically I would like to setup some prioritisation on the switch as 1 service is more important than the others.I have been looking at QoS for this. I appreciate that it won't be an...

we have two 6513 switches as core, but only 1 IDSM2 module on switch 1, the connection between the two swithches is layer 3? how we can copy the traffic from the switch 2 (without idsm2) to the switch 1 (with idsm2).

we are now having two Cisco 2900 switches. One is running in VTP server-mode and one of which is running in transparent-mode. If we set two switches to transparent-mode, is there any impact on our existing VLAN? Is it possible for the switch which is...

Hi All, i have several switches in my network, can any one suggest me a good RADIUS server software to make use to my switches in linux/windows version?

Hi,this is a fiber cable testing report. May I know what's the value ( dB )is passed?=========================================Result Wavelength1.66 dB 850 nmFluke Networks LinkWareCable ID: 24-17-850 ...

hi guys: We have firewall that connect to the internet.We also have a 6509 switch connect to the internal lan. The client PC,6509 interface and firewall are on the same subnet. Client's gateway is on 6509. When client try to access internet, the 65...