Hi,Have a client whose IOS 6500/sup720 shows the following output:----------show output--------Core_2#sho spanning-tree vlan 1Spanning tree instance(s) for vlan 1 does not exist.--------------------------------------Config Excerpt--------no spanning-...
I have a Syslog server configured in my network.The Cisco 6509 switch has been configured to send SNMP traps to the syslog server by using the command:snmp-server host 10.40.70.1 publicDo i need to put in the following command as well :logging 10.40....
HiI would like to be able to monitor multiple RSPAN sessions from multiple switches. (for example i have three VLANs I want to monitor on three switches all to have a destination of three Ethernet interfaces) Ideally I would like all the RSPAN sessio...
Hi: I add a NME-16ES-1G-P to Cisco Router 2811. After I add the module I haven't found a way to make the hosts connected in the module to see the router interfaces. Thanks in advance for any help.
Hi, I have a Catalyst 6509 switch. One HP Linux machine and one Solaris machine are directly connected.Gated process is running on both machines for ospf.The problem is some times i see low throughput when i do ftp from linux machine to solaris mach...
I am unable to reach the internet using SSID TKCTS. Everytime it associates it is given a IP 192.168.1.103. However my fastethernet0 connection I have setup as DHCP and I get the correct ip 192.168.112.2. What am i doing wrong. attached is my con...
