Other Network Architecture Subjects

Hi all,We just implemented vlan(6 vlans) on our network and it works fine. All traffic from diferent VLANs were routed by the L3 switch. We have 3750 switch which acts as L3 switch and 2970 and CE500 as access switches. The issue is when clients trie...

I am looking for technology documentation about VRRP and GLBP on the documentation site. I can find HSRP under [Networking Technology] -> [IP] -> [IP Application Services], so I expected to find VRRP and GLBP nearby, but I could not. Can anyone poi...

I have a situation that I was trying to seek some assistance on. At this site, there are 2 Internet connections, 1 T1 and 1 Cable. Right now everything is going out the T1. They would like to add the cable ISP and a PIX 501 for guests and have all...

First off what limited experience I have have with imaging and multicasting has had to do with single VLAN or WAN implementations of Multicast services.My configuration is as follows:3560G (Acting as the gateway for VLANs 10, 100-1006, 200-206 and 30...

There is a new office being prepared that will house about 15 users and some servers. We're looking at different options for data and phone services, one of them includes Comcast broadband. They will need wireless capability, a firewall, and a site...

Dear allEnvironment Cisco 3550 Switchpls supporttks

Hi,My question is regarding "switchport priority extend trust" question? When I set that command, the mini-switch on the 9760 phone keeps the cos priority of the data traffic received from the IP phone access port, which is great, as supposed to. B...

All,I have a Cat4006 with a router card and I am unable to telnet nor ssh to either of the cards. On the Mod1 (Swtich Card) I am able to console and not ssh or telnet. I recieve a connection to host lost. On the Mod2 (RtR Card) I am able to telnet...

I'm trying to configure a port as trunk (dot1q), but for some reason I only have the choise between two options (access or multi)Switch (config-if)# switchport mode ?accessmultiSo I'm missing the trunk option.IOS Image running : c2900xl-hs-mz-112.8.6...

I have a situation that I was trying to seek some assistance on. At this site, there are 2 Internet connections, 1 T1 and 1 Cable. Right now everything is going out the T1. They would like to add the cable ISP and a PIX 501 for guests and have all...