Other Network Architecture Subjects

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 

Forum Posts

WS-C2950SX-24 its connected to WS-C3560CG-8PC-S with fiber connection. Questions: Am planning to change the 2950sx switch into 2960 or 2960x -> if a remove the SFP from the existing switch and connect it to the 2960 series switch. It should work? 295...

Resolved! IBGP issue

Hi guys, i am trying to implement a simple bgp example with all ibgp peers having full mesh connectivity. i have tried putting in a static route on R2 for the 10.1.14.0 network, and on R4 . still cannot reach 10.1.14.1 or 1.1.1.1 but can reach 10.1.1...

HII had received messages about vulnerability NTP: "Network Time Protocol (NTP) Mode 6 Scanner" and I need to mitigate this vulnerability in my Switch WS-C3650-48PS Version 16.09.03a. Complete the messages> Network Time Protocol (NTP) Mode 6 Scanner ...

QoS to restrict Internet Traffic Bandwidth between 2 sites connected via mpls and for  Internet  they are using a Tunnel which is over  Fortigate Firewall between Sites i.e. HQ and Branch. access-list 101 permit ip host X.X.X.X host Y.Y.Y.Yaccess-lis...

Question:Use the IP address 172.16.35.5/20 to subnet across the following subnets, each subnet to have the following number of hosts, A – 600, B – 200, C – 100, D – 31.For each subnet, derive, showing all workingThe network address (NID)The lowest ho...

Tkay by Level 1
  • 1052 Views
  • 2 replies
  • 0 Helpful votes