Folks, We have a frame relay circuit and are applying MQC to the branch sites. We are not sure if we should apply the service policy to the subinterface or the main interface(serial). any pros and cons?Thanks
Dear Experts,In our network we have 1 core switch (4506) and 15 access switches. 2 of the access switches are server switches (355012GB).we have decided that there is need for resillience in the core segment of the network.I have thought of two solut...
Hi, one of hardware person is going to configure NLB on SGI server running IRIX(6.5) OS in our organization, so does the port channel configuration alone is enough in cisco 6509 which we use to connect switch to switch for etherchanneling?
Hello, I have a list of vlan on my network (45, 56,70, 90 ...) I want on my trunk ports only to let pass traffic for specific vlan. If I want to let pass only traffic of vlan's 45 and 56 on a trunk port what do I do?I tried to use the following comma...
I am in the process of bringing in a dedicated T-1 and a dedicated internet connection into our facility. We have an existing network set up. I need to get the "best solution" for bringing in the dedicated T-1 and being able to set it up via a VLAN t...
hi all, i have 2 6509 connected with an etherchannel. the link is a trunk and there are 12 vlans configured. i want to change the port cost for all vlans.i have found the following commands:"set spantree channelcost","set spantree channelvlancost","s...
Hello, In one site I have 2 6500 (with msfc), in the other a 3750 L3. Both have them own vlans. 6500 -> vlan 2, 3, 4,5... 3750 -> vlan 132, 133, 134... The routers are connected togheter with layer 3 using eigrp routing. I need now to prolongate vlan...
HI, I have a old catalyst 3500XL, In the aim to upgrade my lan i have bought a C 3750, but i have a problem when i try connect the 3750 on my lan.My lan : Intranet ---- 3500XL ==== 4908 ---- interneton the 3500XL, there is a gbic LXMy futur lan :intr...
dear all,how to configure policy-map on catalyst 3550 to shapping bandwidth. I've tried to setting that police-map in one of interface, but when I wrote sh policy-map interface fa0/1, in class-map field, the result are class-map: policeIn (match-all)...
Hi, i have got cisco 1751 with the IPsec IOS, having 2 ehternet ports, now i wanted to have VPN server on this router, so how do i configure, requirement is 1 port will be having public IP & other port will be having private IP pointing towards my LA...
Hi, Sirs.My Catalyst 2950-24 (IOS Ver 12.1.22EA7)stops communicate with an other switch port of a Catalyst 3512XL-EN after catalyst 2950 powered on 1 or 2 days. th show interface shows that 2476498 ignored.FastEthernet0/1 is up, line protocol is up (...
Hi allWhat happens if a configured VLAN is not on any MST instance. I understand it would end up in MST 0. Does this mean RSTP would not apply to this VLAN?TIASam
