Other Network Architecture Subjects

Hi.I get the following message "access-list logging rate-limited or missed" After that happend 2 of our 2950 switches is not rechable anymore.Is there a way to adjust anything on the switch on wich the above is showing.it is an 4506 catalyst switch r...

CHAN4507#sh platform cpu pac statPackets Dropped In Hardware By CPU Subport (txQueueNotAvail)CPU Subport TxQueue 0 TxQueue 1 TxQueue 2 TxQueue 3------------ --------------- --------------- --------------- --------------- ...

Can anyone recommend a good book to start on BGP protocol? Thanks.

Please,i'm looking for application client server multicast for lab ccnp multicast.Is somebody where i can find a free soft for test.Any suggest will be appreciated.Regards.

if I have a server and webpage at home with my site on it, do I just give my isp the dns name or domain and ip of my natted server, also is this the same thing for microsoft exchange mail server, do I just tell them the server ip and domain ?cheers

Can I do intervlan routing on catalyst 2924XL, 2970 or 2950 ?

3750 stacked switchinterface gig 1/0/1 no switchport no ip address channel-group 1 mode oninterface gig 2/0/1 no switchport no ip address channel-group 1 mode oninterface port-channel1 switchport trunk encapsulation dot1q switchmode trunksince ...

Hi, i have got cisco 3750 3 Nos. stacked together, below are the config. for etherchannel & the err. msg. i get.interface gigabit 1/0/25 switchport mode access channel-group 1 mode desirableonce if i do that, i get "creating a port-channel interface ...

Hi,on cat3750 you can limit the Bandwidth on a n egress interface using the SRRcommand:srr-queue bandwidth limit "weight1"the weight1 is a variable in the range from 10 to 100 (default)This means that in a 3750G a giga interface the egress queue can ...

Hi there!I have an 6500 IOS switch where i am using a policy for Voip trafic and i works for serial interface but not for my Gigabit interface !class-map match-all VOICE-CONTROL match ip dscp cs3class-map match-all VOICE match ip dscp ef!!policy-ma...

Hi , Yesterday my core switch got hung after i restarted it started working fine. I think its a STP loop problem but please tell which command should i run which can tell that STP problem was there Thanks Ab

Hi,I am playing around with 3750 stacks and the IOS versions they are running and trying to get them to do what the docs say.In particular I have added a switch to a stack with a minor compatability error IOS. I would of expected the stack manager to...

Hi,I'm running, Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(25)SG, RELEASE SOFTWARE (fc2), on my 4503's.I've setup intervlan routing which works perfectly.Now i have an Netscreen firewall for connection to ...

HiFogive me if this sounds like a stupid question, but is there any way of creating a static arp entry for a range addresses. eg one static arp entry for an entire network. Cheers