How would I stop eigrp routes being advertised so that it doesnt keep bringing up my isdn line, what do I put on the access list ?
How would I stop eigrp routes being advertised so that it doesnt keep bringing up my isdn line, what do I put on the access list ?
hi friends,last night when I was studying multicasting, I realized something interesting maybe.as you know RFP check is effective on PIM DM, checks unicast route table if multicast packet came from where it should be, according to route table.. what ...
hicould you pls tell me why catalyst CE500 series just support 250 users not any more?
Hi Everyone,I m working with a leading ISP in India.The issue is that our engineering team has come up with the plan of migrating all management vlans for metro and other switches to vlan1.Presently we are using spearate vlans for management.Somethig...
hi, im trying to configure my 871 router, in the online manual (http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter09186a008045d249.html#wp1137813) it says: Router# show running-config but how can I connect to th...
Currently I'm using IOS SLB with stateless backup on a pair of switches running HSRP. We are installing another project with similar requirements except we are trying to move to GLBP for a variety of reasons. As best as I can determine the stateless ...
I have a 6509 running with a Sup720 and the latest IOS. Trying to configure several ports as a private VLAN with the below config. Problem is, in addition to not being able to talk to each other, hosts can't talk to the promiscuous port. Thoughts?...
Can anyone tell me how this is relayed to my pc from my router, the wan (dsl) interface has its ip assigned from the isp, does my pc use the ip name-server that the router has for its dhcp dns addresses ?
I am planning to implement 802.1x on a 4506 switch. The issue that i have is i have 5 user Departmental vlan on the switch. How can i configure the ACS to assigned vlan for each of my user to their respected departmental vlan? please help
Hi,I have a 4507R with IOS ver 12.1(12c)EW1. I want to map a mac-address to 2 different ports on the same switch and on the same blade. However, it appears that I am only able to map one mac-address to one port. here is the command I entered:(conf...
Need a little help with a command. How in CatOS to copy run star? What is the analog command to copy run star(from IOS), in CatOS?
I have the following scenario: - one switch 2950G-48-EI - 6 laptops - 10 drops connected each one on a port of the switchI'd like to setup port security to allow "roaming" of the 6 laptops on the 10 drops without engaging port security violations I c...
i have got cisco 6509 in that i typed "show logging"i get some list of things & finally "0(emergencies) 1(alerts) 2(critical)3(errors) 4(warnings) 5(notifications)6(information) 7(debugging)" so how do ...
I am working on setting up vlan trunks as well as LACP bundles on two Cat 6506 ports (running 8.3 CatOS) to connect to a dual nic on a VMware server.The trunk works but LACP doesn't seem to be running across the link. I have followed the Cisco docs ...
I have a facility that is currently running a single class C network with a mix of hubs and switches. We are upgrading their infrastructure to be completely switched and implementing VLANS at the same time. I am planning to use a 3560 as the core swi...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-26-2024 02:28 AM | ||
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |