Hello,I have the following topology wher PE4 is a provider edge of an MPLS cloud, and Internet is a simple router.PE4: F0/0 192.168.54.2/30Internet E3/1: 192.168.54.1/30 I would like to ping those two router between them. Therefore I ran the followin...
Has anyone noticed that there is a bogus website http://serialnumbervalidation.com/64253/cgi-bin/index.cgi that claims to check for the Clock Signal Compenant failure but returns inconsistent results? It returns "not affected" no matter what you typ...
Hello I need some assistance with remote access VPN. Our current VPN client connects thru one ISP1 to our ASA. We would like the VPN client to use both our ISP's. How can i accomplish this design? Do i need to have another ASA pair? ISP1 = 100MbISP2 ...
Hi all,can anyone point me in the right directionMy customer is asking for an ASR1001-X to create a pseudowire connetion on a mpls circuitThe Asr already has an advanced enterprise services licensemy question is do i need to supply any other licenses...
Hi there,a few days ago I started introducing myself with the first course for CCNAv7. All is fine so far but I would like to have solutions for the labs. Especially longer taking labs, like "11.9.3 Packet Tracer - VLSM Design and Implementation Prac...
Dear All, Im pretty new here and also pretty new in networking. Let me tell you what i need help for.So, i need to configure a Cisco 1841 as you can see in the attached diagram. I noticed Cisco 1841 comes with 4 ports: 2 FE, 1 Console and 1 aux. 184...
Hello,I have trouble with ports going up/down all the time in my company network.When i use PCs that are connected to this ports everything works but on switch it shows like this:28-May-2020 07:50:52 %LINK-W-Down: gi1/0/4528-May-2020 07:50:56 %LINK-I...
Hi all: I'm brand new to the community & still a student, but did a search and could not find a question for this specific problem that I'm repeatably having that is driving me stark raving mad! lol In PacketTracer, I want to disable portfast on my t...
I bought this equipment and when it started it does not allow me access when configure terminal, it tells me command not supportedWhat could be happening?Best regards
Summary: I can ssh to an svi on the switch, but I cannot ssh to an L3 configured port (ie no switchport, ip address set) I can ping the L3 interface from ssh client and from the internet (so gateways and routing are all working). The L3 interface can...
problem with the new version of packet tracer, every time I should restart because of over blast
I downloaded last version (7.3) debian package of PT and tried to install in Debian 10, my desktop, and tried to in Ubuntu 18.10 and 16.10. Was a terrible experience without a happy end. At final, give me all kind of errors. In Debian, return this er...
I've next message during boot-System Bootstrap, Version 8.1(3)Copyright (c) 1994-2004 by cisco Systems, Inc.Cat6k-Sup720/SP processor with 524288 Kbytes of main memoryAutoboot executing command: "boot disk0:"PCMCIA slot0 device is not initializedopen...
I ran across this bit of material while learning about port access control lists: PACLs have a few restrictions that vary from platform to platform. The followingare some of the most common restrictions:• PACLs only support filtering incoming traffic...
