Other Network Architecture Subjects

I've read how to do this, and it's quite easy. This is the same method I used on a Cisco ISR4321 router and it works fine, but no so much on the Cisco 3850 switch. Config is below, and the error message / error condition is at bottom....no service pa...

Hello,I have the following topology wher PE4 is a provider edge of an MPLS cloud, and Internet is a simple router.PE4: F0/0 192.168.54.2/30Internet E3/1: 192.168.54.1/30 I would like to ping those two router between them. Therefore I ran the followin...

Has anyone noticed that there is a bogus website http://serialnumbervalidation.com/64253/cgi-bin/index.cgi that claims to check for the Clock Signal Compenant failure but returns inconsistent results?  It returns "not affected" no matter what you typ...

Hello I need some assistance with remote access VPN. Our current VPN client connects thru one ISP1 to our ASA. We would like the VPN client to use both our ISP's. How can i accomplish this design? Do i need to have another ASA pair? ISP1 = 100MbISP2 ...

Hi there,a few days ago I started introducing myself with the first course for CCNAv7. All is fine so far but I would like to have solutions for the labs. Especially longer taking labs, like "11.9.3 Packet Tracer - VLSM Design and Implementation Prac...

Dear All, Im pretty new here and also pretty new in networking. Let me tell you what i need help for.So, i need to configure a Cisco 1841 as you can see in the attached diagram.  I noticed Cisco 1841 comes with 4 ports: 2 FE, 1 Console and 1 aux. 184...

Hello,I have trouble with ports going up/down all the time in my company network.When i use PCs that are connected to this ports everything works but on switch it shows like this:28-May-2020 07:50:52 %LINK-W-Down: gi1/0/4528-May-2020 07:50:56 %LINK-I...

Hi all: I'm brand new to the community & still a student, but did a search and could not find a question for this specific problem that I'm repeatably having that is driving me stark raving mad! lol In PacketTracer, I want to disable portfast on my t...

I bought this equipment and when it started it does not allow me access when configure terminal, it tells me command not supportedWhat could be happening?Best regards

Summary: I can ssh to an svi on the switch, but I cannot ssh to an L3 configured port (ie no switchport, ip address set) I can ping the L3 interface from ssh client and from the internet (so gateways and routing are all working). The L3 interface can...

I downloaded last version (7.3) debian package of PT and tried to install in Debian 10, my desktop, and tried to in Ubuntu 18.10 and 16.10. Was a terrible experience without a happy end. At final, give me all kind of errors. In Debian, return this er...