Hello everybody,can somebody tell me if the IOS version 12.1(18) in my router is ok for IPV6 multicast?Thanks
Hello everybody,can somebody tell me if the IOS version 12.1(18) in my router is ok for IPV6 multicast?Thanks
I have configured Cisco 1700 router with necessary DHCP commands (DNS, Default Router, Domain Name, Lease, Import all) but then too its unable to provide the IP addresses from the defined pool when the laptop is connected to it ! Also, When Sh ip dhc...
Hi,I would like to ask if Catalyst 4503 SupII-Plus-TS(WS-X4013+TS)for Catalyst 4503 is capable of Inter-VLAN routing? We will be installing Cisco IOS BASIC L3 Cat4500 SUP 2+/4/5(RIP,St.Routes,IPX,AT)(part number: S4KL3-12225EWA) on the Sup2+ engine.T...
Hello guyz, here I have a cisco 1750, it have 3 serial ports:serial0 is connected with a internet link of 1,5mbsserial1 is connected with a interlet link of 1,5mbsserial2 is connected to a lan-to-lan connection that connect our main lan with a small ...
can any1 pls help... i stuck in create logging for my router. i wish to log all the host connected to my router throught SSH. My router only allow ssh or console.
Hi... I am facing problem of Clock time modifies to 1st March whicle 2900 series or 3500xl switches reloads.My IOS is c2950-c3h2s-mz.120-5.3.WC.1.I need to set the clock again every time it reload or poercycled.We have 173 Switches installed in Camp...
I am currently upgrading a Catalyst 3550 to a Catalyst 3750. Most of the original config is accepted by the new switch although it is not happy about the QOS section. I am unsure how to resolve this, can anyone please assist?The original config is:...
Hi!I'm configuring storm control on Catalyst switches and it has been working fine. I notice that when I configure this feature on a port, you can select either percentange, bps or fps as threshold. My questions is, for each paramater, what level/num...
Hello,I am using a catalyst 2950 switch and connecting machines which have the operating system as TRU64 UNIX 5.1B (HP make DS25 servers) and WINDOWS XP Professional. The WINDOWS machines are getting connected on the network ( I am able to PING each ...
I have recently "inherited" a legacy network with 1601 and 3620 routers connecting to a Catalyst 2950 switch. On both switch interfaces i am seeing high levels of input errors, collisions and deferred packets indicating a duplex mismatch. I have hard...
Hello,I have two 6513 sup 720 IOS 12.2(18)SXD5, named SW1 and SW2.SW1 and SW2 are connected with a 10Gb trunk. VAN 101 (Server Farm) is spreaded between the switches. SW1 and SW2 are connected L3 (routed port) with a GW to Intranet and Internet.I hav...
Can someone tell me what it is and what is used for ? and how I would set it up ?
I think I have a dead switch. However, I figured I would see if anyones had a similar situation. When I power the device up the stat light comes on and stays on. Then the port lights flash once then the system light starts flashing. Once the system l...
I recently purchased seven 6500 series switches, a couple operating with IOS (6509s) and the rest with CatOS (6506s). Each switch has two 3000W power supplies and a fan tray. Looking at environmental monitoring, the switch is neither heavily loaded...
hi guyz, i wondering how to creat a banner for SSH login. i configure my 1760 router only allow console or SSH login only. BTW i have try create a banner, but it wont show up when i login via SSH..... any1 can help?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
02-20-2024 07:45 AM | ||
02-15-2024 09:08 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM | ||
11-09-2023 09:30 AM |
User | Count |
---|---|
3 | |
3 | |
1 | |
1 | |
1 |