cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
293
Views
0
Helpful
1
Replies

Cant Ping the networks in my Wired and Wireless Activity

kimjereen
Beginner
Beginner

So we were tasked with this packet tracer activity. Recreate the topology, fill in the IP addresses, and connect the cables. All of my wires are connected, and I've entered the addresses listed below, but during 

Part 4: Verify Connections

I was unable to ping the following addresses. I'm not sure if the IP addresses, gateways, or the DNS are incorrect or not. Please help. I've been attempting to solve them for nights and it's still not working. 

this is what I've done so far...

 

below is my activity and packet tracer file.

1 Reply 1

Flavio Miranda
VIP Mentor VIP Mentor
VIP Mentor

Hi

 Identified some points to make right but honestly, did not solve entirely yet. 

Router 0 needs to have route to 192.168.1.0, otherwise it can reply DHCP requests.

Router WRT has a Typo on the IP address.

the Cloud is using DSL on the interface and I think it should be Cable.

But, Router0 still does not ping WRT en this is the problem for now.

 

Try to look after this.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers