Cat6509 form CATOS to IOS

[schmidta]

Hello,

i want to migrate from CATOS 6.3.3 to IOS.

hardware :

1000BaseX Supervisor WS-X6K-SUP1A-2GE

Multilayer Switch Feature WS-F6K-MSFC

1000BaseSX Ethernet WS-X6416-GE-MT

10/100BaseTX Ethernet WS-X6348-RJ-45

Can i migrate with this supervisor and msfc to IOS?

I can't extract the correct infotmation from the table 2. Hardware Modules from

http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00800c8441.shtml

[Prashanth Krishnappa]

Yes.. You sure can convert to Native IOS and all cards listed above will be supported in Native IOS.

[schmidta]

Oh,

i forgot the L3 Switching Engine WS-F6K-PFC.

Can i anyway migrate to Native IOS?

[Prashanth Krishnappa · Accepted solution]

You have an MSFC as well. So you can convert to Native IOS. The file names would start with c6sup11-xxxxxxxx.bin