01-28-2003 04:06 AM - edited 03-02-2019 04:35 AM
i would like to remove the command from my switch config.
no spanning-tree vlan 173
no spanning-tree vlan 204
what is the command for this.
please guide,
01-28-2003 04:14 AM
The default is spanning-tree enabled.
The command: spanning-tree vlan 173 will restore the default.
01-28-2003 04:15 AM
Simply do:
conf t
spanning-tree vlan 173
spanning-tree vlan 204
exit
Regards,
Milan
01-28-2003 10:25 PM
Hi Milan , After doing as mentioned i am still not able to remove from the config..
C_01S_3548_02(config)#spanning-tree vlan 173
C_01S_3548_02(config)#spanning-tree vlan 204
C_01S_3548_02(config)#^Z
C_01S_3548_02#sh run
Building configuration...
Current configuration:
!
! Last configuration change at 11:50:48 UTC Wed Jan 29 2003
! NVRAM config last updated at 14:06:17 UTC Tue Jan 28 2003
!
version 12.0
!
no spanning-tree vlan 204
no spanning-tree vlan 173
ip subnet-zero
config deleted *********
01-28-2003 06:22 AM
The XLs support 64 spanning-tree instances. If you have spanning tree running on more than 64 VLANs, you will see this for the remaining of the VLANs. How many VLANs do you have in your network?
01-28-2003 10:30 PM
Ya i have more the 64 vlan in my campus and the numbers are futher expected to rise upto 200++.
can u also give me some link which would futher clearefy.
thanks
01-28-2003 11:08 PM
Try this link:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/scg/swsyst.htm#xtocid46
Goodluck!
01-28-2003 11:53 PM
Well, you need to decrease the number of VLANs on particular switches.
Use
config-if)#switchport trunk allowed vlan remove
command or
(config-if)#switchport trunk pruning vlan add
command (I suppose you are using VTP) on your trunks.
Regards,
Milan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide