Configuring 1605 for POP-3

[stevep]

I have a 1605 running ver 11.3 with NAT

inside exchange server is 192.168.100.2 with a static route to the serial interface as follows:

ip nat inside source static tcp 192.168.100.2 25 64.122.6.xxx 25

what I need to be able to do is basically the same but with port 110 for pop-3

Can someone help me out

TIA

Steve

[beth-martin]

Adding >>ip nat inside source static tcp 192.168.100.2 25 64.122.6.xxx 110<< should work for you.