01-30-2003 12:54 AM - edited 03-02-2019 04:40 AM
Has anyone configured a pix to be seen by RME. if so could you please point me in the direction of documention examples on how to do this. I can ping the pix 515 from the server dos prompt but CW2000 R5 will not add it to the inventory.
I need the pix commands
TY
Mike
01-30-2003 12:21 PM
PIX requires 6.1(1) min for RME 3.4 support. Make sure that you're adding the PIX with correct device credentials for RME to add it in the inventory, including SNMP credentials.
01-30-2003 12:39 PM
TY
I know that, I need to know if the pix requires any special config to permit managment
Mike
01-30-2003 12:48 PM
No. As long at the RME supports the device and the credentials are correct, it should work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide