CW Software version report

[thewolffman]

Hi,

Because there are some vulnerable IOS version, i want to use CW to give me a list of al our routers (700+ pieces). With the software version report i can only choose less then 50 routers.

"Select devices to view software details.WARNING:A maximum of 50 devices can be selected at a time."

Is there something else i can do you check al our routers on their IOS version?

Thanks,

Jeroen

[seandsmith37]

I dont know where you got the 50 device restiction. Here is what I do. I had to run the report quite a few times for my IA department. RME ---> Inventory ----> Software reports. Select all the devices. Next. You have your report. I would recomend that you export to a CSV file then creat a excel doc. Make it easier to read and distibute.

[thewolffman]

hum...that's strange.

I get the message on the diaglog that follows RME ---> Inventory ----> Software reports, which says:

Select devices to view software details.WARNING:A maximum of 50 devices can be selected at a time.

We use CW2000 with RME 3.4 on Sun

[seandsmith37]

Ahh i have CW2k RME 3.5 on server2k, the version may have a restriction on it.