DHCP relaying ???

[admin_2]

I have 2 networks joined by a T1 with a 1720 on each end of it. I use a W2K server for dhcp and have 2 zones created for each network. One is 10.10.10.x/255.255.255.0 and the other is 10.10.20.x/255.255.255.0. I can't get the .20 network to use dhcp. I have dhcp enabled on the clients and i have fumbled around with some iphelper addresses with no avail. My dns/dhcp server is 10.10.10.252. Any help would be great....

[oldman]

First,make sure your helper address is right given

Second,make sure the Lan address (gateway of each network) is right given.

Third,figure out the gateway of each zones in the DHCP server.

hope help