Dial-in with V.110 Protokoll on 3725 + NM-30DM Modul

frank0815 · ‎11-21-2003

Hello,

i will dial-in with protokoll V.110, but when i use "sh modem config 2/0" then:

S29 = 6 V.90 modem standard

I will change it to:

S29 = 8 V.110.

How can i do that!!!

I will work with this Protokoll on this Router only.

Georg Pauwen · ‎11-21-2003

Hello,

which IOS version are you using ? You need at least 12.2(8)T, I think the 3725 ships with 12.2(3), so you would need to upgrade.

Regards,

Georg Pauwen

frank0815 · ‎11-21-2003

OK, check it up.....

Question:

Can i flash the digital-Moduls (Firmwareupgrade)?

Is it nessesary?

If i want use the string "modemcap" and wand save the configuration then shows follow error:

"This command has no effect on this line; use modem AT commands instead"

Is it an Bug?

Frank

frank0815 · ‎11-21-2003

OK,

i did dial-in in my company and was on the router of our costumer.

Here details......

#############################################

bvrr02#dir

Directory of flash:/

1 -rw- 7507936 Mar 01 1993 00:06:38

c3725-i-mz.122-13.T8.bin

2 -rw- 16773120 Mar 01 1993 04:19:16

c3725-is-mz.122-13.T8.bin

31932416 bytes total (12713984 bytes free)

bvrr02#

#############################################

Defautl IOS is "c3725-i-mz.122-13.T8.bin"

later i did try flash the IOS

"c3725-is-mz.122-13.T8.bin"

For me is it not the first time to flash cisco routers, but when i use the command "sh ver", then i see the old IOS. When is use the command "sh ru". Then i see the new IOS. What is wrong?

I did change config-register from 0x2102 to 0x2101 then i download the new IOS. Then change it the boot system flash to the new IOS (boot system flash c3725-is-mz.122-13.T8.bin) and change to 0x2102 and made a reboot. That`s all. Was the new IOS not correctly download. I did need around 3 times to download the IOS on this router, because the have in our company many switch and V-LAN`s. My Workstation was the TFTP-Server and work with the virtual Networkdriver on one NIC and simulate two NIC`s then.

OK, i think i will delete the new IOS and try a new download from the website and then in the router.....

What it work:

I can dial-in with default setting on a client. PPP over ISDN ect.....

If i wand dial-in with V.110 setting on a client, i can`t dial in and get an error on a client. "no open Ports....."

The client is a Notebook with whe ISDN-Card. Here can i use AT-commands an change to V.110. Ohter way is to use my mobilphone with V.110 Protocoll. I can dial-in on ISDN-Cards with my Mobilphone, but not on this router.....

Help me, please.

Georg Pauwen · ‎11-22-2003

Hello,

do you have at least portware 2.7.4.0 ? If you can, upgrade to 2.9.4.0.

Check what you see when you issue the command show modemcap x (whereby x is your digital modem). It probably says S29=6. Can you change that to S29=8 with the edit modemcap x command (in config mode) ?

Regards,

Georg

frank0815 · ‎12-10-2003

I can`t connect via V.110

Can you help me, please.

#####################

General OS:

Modem control/process activation debugging is on

Dial on demand:

Dial on demand events debugging is on

CSM Modem Management:

Modem Management Call Switching Module debugging is on

The following ISDN debugs are enabled on all DSLs:

debug isdn error is ON.

debug isdn q931 is ON.

############################

xxx2#

*Mar 13 15:35:27.572: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x0072

Sending Complete

Bearer Capability i = 0x8890214840BB

Standard = CCITT

Transer Capability = Unrestricted Digital

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98381

Exclusive, Channel 1

Calling Party Number i = 0x21, 0x83, 'xxxxxxxxx'

Plan:ISDN, Type:National

Low Layer Compat i = 0x8890, '!H@', 0xBB

*Mar 13 15:35:27.576: CSM: MODEM_REPORT from 1/0:0, call_id=0x14, event=0x1, cause=0x0, dchan_idb=0x6194F328

*Mar 13 15:35:27.576: CSM: Next free modem = 2/0; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/0 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/1; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/1 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/2; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/2 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/3; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/3 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/4; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/4 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/5; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/5 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/6; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/6 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/7; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/7 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/8; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/8 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/9; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/9 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/10; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/10 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/11; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/11 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/12; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/12 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/13; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/13 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/14; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/14 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/15; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/15 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/16; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/16 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/17; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/17 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/18; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/18 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/19; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/19 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/20; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/20 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/21; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/21 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/22; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/22 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/23; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/23 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/24; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/24 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/25; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/25 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/26; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/26 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/27; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/27 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/28; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/28 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM: Next free modem = 2/29; statbits = 10040

*Mar 13 15:35:27.576: Modem 2/29 CSM: TTY statbits = 10040

*Mar 13 15:35:27.576: CSM incall failed with dchan index=1, idb state=4, sb=0

*Mar 13 15:35:27.576: CSM: MODEM_REPORT rcvd DEV_INCALL for call_id 0x14, No modem available

*Mar 13 15:35:27.576: ISDN Se1/0:15 **ERROR**: accept_incoming_csm_call: modem problem Requested circuit/channel not available(0x2C): b channel 0, call id 0x14

*Mar 13 15:35:27.576: CSM: MODEM_REPORT from 1/0:0, call_id=0x14, event=0x0, cause=0x0, dchan_idb=0x6194F328

*Mar 13 15:35:27.576: CSM: MODEM_REPORT rcvd DEV_IDLE for call_id 0x14, modem not found due to wrong b channel number or b channel is deallocated

*Mar 13 15:35:27.580: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0x8072

Channel ID i = 0xA98381

Exclusive, Channel 1

bvrr02#

*Mar 13 15:35:27.580: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x8072

Cause i = 0x80AC - Requested circuit/channel not available

*Mar 13 15:35:27.780: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x0072

*Mar 13 15:35:27.780: CSM: MODEM_REPORT from 1/0:0, call_id=0x14, event=0x0, cause=0x0, dchan_idb=0x6194F328

*Mar 13 15:35:27.780: CSM: MODEM_REPORT rcvd DEV_IDLE for call_id 0x14, modem not found due to wrong b channel number or b channel is deallocated

*Mar 13 15:35:27.780: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x8072

bvrr02#

##########################################

version 12.2

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

no service dhcp

!

hostname xxxxx

!

boot system flash c3725-is-mz.122-13.T8.bin

boot system flash

boot system flash c3725-i-mz.123-5.bin

enable password xxxxxxxxx

!

username xxxxxxxxx password 0 xxxxxxxx

modem country mica germany

ip subnet-zero

!

no ip domain lookup

!

isdn switch-type primary-net5

!

modemcap entry new:MSC=&F&D2S34=9600S29=8

!

controller E1 1/0

pri-group timeslots 1-31

description "SMS-Dialin der Fahrzeuge"

!

interface Loopback0

ip address 172.22.20.1 255.255.255.0

!

interface Loopback1

ip address 172.22.61.1 255.255.255.0

!

interface FastEthernet0/0

description "LAN - BVR Duesseldorf"

ip address 192.168.41.16 255.255.255.0

duplex auto

speed auto

!

interface FastEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

interface Serial1/0:15

no ip address

encapsulation ppp

dialer rotary-group 10

dialer-group 5

isdn switch-type primary-net5

isdn incoming-voice data

no cdp enable

ppp authentication chap

ppp multilink

!

interface Group-Async0

ip unnumbered Loopback0

encapsulation ppp

dialer in-band

dialer idle-timeout 900

dialer-group 5

async mode interactive

peer default ip address pool ASYNC

no keepalive

no fair-queue

ppp authentication chap

ppp multilink

group-range 65 94

!

interface Dialer10

ip unnumbered Loopback1

encapsulation ppp

dialer in-band

dialer idle-timeout 900

dialer-group 5

peer default ip address pool ISDN

ppp authentication chap

ppp multilink

!

ip local pool ASYNC 172.22.60.2 172.22.60.254

ip local pool ISDN 172.22.61.2 172.22.61.254

ip classless

ip route 172.29.199.0 255.255.255.0 192.168.41.210

ip route 193.73.132.0 255.255.255.0 192.168.41.210

ip http server

!

line con 0

line 65 94

flush-at-activation

modem autoconfigure type new

terminal-type m

line aux 0

line vty 0 4

exec-timeout 0 0

password xxxxxxx

logging synchronous

login

!

end