07-30-2001 09:53 AM - edited 03-01-2019 06:44 PM
I am a small ISP and I have an access server, a cisco 3640 with a 16 modems module, in a remote dialin session the modem ends up in an already existing session initiated, the end time and the initiated session is varilbe the users may be conncted for 5 seconds or 5 minutes before an ends up.
What can I check to solve this problem
08-07-2001 11:05 PM
try using
debug ppp error
debug ppp packets
debug ppp Authentication
use "show log" command
and see whats wrong with your session.
Give us the show running-config to see your configuration.
08-09-2001 08:33 AM
This is the configuration
sh run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname rosario
!
aaa new-model
aaa authentication login default tacacs+
aaa authentication login no_tacacs enable
aaa authentication ppp default tacacs+
aaa authorization exec default tacacs+
aaa authorization network default tacacs+
aaa accounting exec default start-stop tacacs+
aaa accounting network default start-stop tacacs+
enable secret 5 $1$NICz$Otj4lwjHQOZi6ZyLH.xYP/
enable password richard
!
modem country microcom_hdms mexico
ip subnet-zero
ip host aleman 192.168.2.254
ip name-server 148.233.6.114
ip address-pool local
!
partition flash 2 8 4
!
!
!
controller E1 2/0
framing NO-CRC4
channel-group 0 timeslots 1-8
channel-group 2 timeslots 10
!
controller E1 2/1
framing NO-CRC4
channel-group 3 timeslots 1-31
!
!
process-max-time 200
!
interface Ethernet0/0
ip address 192.168.0.100 255.255.255.0 secondary
ip address 148.223.171.113 255.255.255.240 secondary
ip address 148.233.6.113 255.255.255.240
no ip directed-broadcast
ip nat inside
!
interface Serial2/0:0
description ENLACE HACIA INTERNET URSE<-->UNINET
ip address 148.233.7.157 255.255.255.252
no ip directed-broadcast
ip nat outside
encapsulation frame-relay
frame-relay lmi-type ansi
!
interface Serial2/0:2
description ENLACE ROSARIO<-->ALEMAN
ip address 192.168.254.5 255.255.255.252
no ip directed-broadcast
ip nat inside
!
interface Serial2/1:3
description ENLACE ROSARIO <--> ALEMAN ATRAVES DEL E1
ip address 192.168.254.10 255.255.255.252
no ip directed-broadcast
ip nat inside
!
interface Group-Async1
description INTERFACE DEL POOL DE MODEMS
ip unnumbered Ethernet0/0
no ip directed-broadcast
ip nat inside
encapsulation ppp
ip tcp header-compression passive
async default routing
async mode interactive
peer default ip address pool default
no cdp enable
ppp authentication chap pap
group-range 33 48
!
ip local pool proxy 192.168.0.11 192.168.0.26
ip local pool default 192.168.0.101 192.168.0.116
ip nat pool grupo 148.233.6.121 148.233.6.124 netmask 255.255.255.240
ip nat inside source list 1 pool grupo overload
ip classless
ip route 0.0.0.0 0.0.0.0 148.233.7.158
ip route 148.233.6.117 255.255.255.255 192.168.254.6
ip route 148.233.6.117 255.255.255.255 192.168.254.9
ip route 148.233.7.0 255.255.255.0 128.233.7.158
ip route 192.168.0.0 255.255.255.0 148.233.6.114
ip route 192.168.2.0 255.255.255.0 192.168.254.9
ip route 192.168.2.0 255.255.255.0 192.168.254.6 30
!
access-list 1 permit 192.168.0.0 0.0.255.255
tacacs-server host 148.233.6.115
tacacs-server key urseurse
!
line con 0
login authentication no_tacacs
transport input none
line 33 48
autoselect ppp
modem InOut
transport input all
line aux 0
line vty 0 4
password cisco3640
!
end
08-11-2001 01:44 AM
Add these lines
---------------
stopbits 1
flowcontrol hardware
session-timeout 2
Let me know the outcome!
Please post further messages with related FORUM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide