11-11-2004 08:31 AM - edited 03-02-2019 07:53 PM
I want to setup two startup configs on AS5350, One will run as a VoIP gateway, the other as a FAX Gateway.
The IOS Version is 12.3.
This is a lab enviroment, as I assume will be loaded as primary and secondary configs as needed for testing.
11-11-2004 03:09 PM
I don't see this working, since the file names are running-config and startup-config, and you can't have more then one.
An option would be to setup a tftp server, and use something like
copy tftp:
I have never played with that, but those commands are in the IOS routers.
Might be something to try.
Good luck,
Mike
11-12-2004 12:27 AM
Hi,
I'm not sure if AS5350 allows you to save a file to the flash.
If yes, I'd load the VoIP gateway config to the running config and issue
copy running-config flash:voip.txt
command.
Then load FAX Gateway config to the running config and issue
copy running-config flash:fax.txt
command.
Then you can copy flash:viop.txt startup-config (or
copy flash:fax.txt startup-config) and reload the router any time you need to swap to the other config.
The only complication is you have to remember saving any changes to the flash files.
Regards,
Milan
12-01-2004 06:22 AM
Milan,
The commands you sent work fine, can load 2 configs on AS5400 / 5350.
Thanks
Slan / Ed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide