09-08-2003 06:57 AM - edited 03-02-2019 10:10 AM
Hello Guys,
I got one Cat 6509 and several Cat 3550 in the Bulding. I wannt to enabling Multicast on several 3550. Cann some one tell my why it not works ? what is missing on the config ? My config look like this :
Thanks for any help
AFE
SW01-6509GL711> (enable)
#igmp
set feature vrrp-flood disable
!
#rgmp
set rgmp enable
!
#mls
set mls nde version 8
set multicast router 4/3-5,4/8
set trunk 4/1 off negotiate 1-1005,1025-4094
set trunk 4/2 off negotiate 1-1005,1025-4094
set trunk 4/3 off negotiate 1-1005,1025-4094
set trunk 4/4 off negotiate 1-1005,1025-4094
set trunk 4/5 off negotiate 1-1005,1025-4094
set trunk 4/6 off negotiate 1-1005,1025-4094
set trunk 4/7 off negotiate 1-1005,1025-4094
set trunk 4/8 off negotiate 1-1005,1025-4094
!
#module 5 : 16-port 1000BaseX Ethernet
set module name 5 Uplink Access
set vlan 300 5/1,5/16
set port name 5/1 DVAGGHOST
set port name 5/16 UG
set multicast router 5/1
------------------------------------------------------
RT01-6509GL7-11#
ip multicast-routing
no mls ip multicast aggregate
interface Loopback0
ip address 10.61.254.249 255.255.255.252
ip pim sparse-dense-mode
!
interface Vlan314
description 4OG
ip address 10.61.204.2 255.255.255.0
ip helper-address 10.61.10.100
ip helper-address 10.61.10.101
no ip redirects
ip pim sparse-dense-mode
standby use-bia
standby ip 10.61.204.1
standby timers 3 10
standby priority 120
standby preempt
standby authentication Vlan314
ip pim rp-address 10.61.254.249
ip pim send-rp-announce Loopback0 scope 16
ip pim send-rp-discovery scope 16
09-10-2003 08:02 PM
Hi,
Why is the multicast router statically set to 5/1? If this is a Cat6k with MSFC, it should be set to 15/1.
-Robert
09-11-2003 11:00 PM
Hello Robert,
thanks for your replay ! just to say that i solve the problem : since i configure the ip pim in Vlan 300 where my Ghost server is located.
Thanks
AFE
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide