09-02-2015 11:14 PM - edited 03-03-2019 07:58 AM
Hi,
I am new for CCNA. I would like to load IOS on Cisco 2911 router.
I heard about through TFTP server. I don't have any guidance, how to. Anyone knows, please help me.
09-03-2015 12:35 AM
Hi,
You need to check the size of new IOS which needs to be uplaoded in flash of 2911 router.Make sure that enough space is available in flash so that new IOS can be uploaded.
same can be checked through dir flash0: of flash:
you need to use the command copy tftp flash: to upload IOS is router.
If enough space is availabel in flash: then, u can keep both IOS and use command boot system flash:new IOS filename so that router boots next time using new IOS.
you can refer the link
regds,
aman
09-03-2015 12:41 AM
Loading the IOS into a router using TFTP maybe a Cisco "method" but this is "old school".
The router has a CF slot at the back, eject the CF and use a media card reader to copy the IOS from the client to the CF card.
Another method is to copy the IOS from the USB port to the CF card.
09-03-2015 12:55 AM
... but note that "old school" method works on almost any product of this class, regardless the model number and manufactured date.
Those "brave new world" ;-) methods are not as generic ...
But I should not continue discussion in off-topic thread ;-)
09-03-2015 12:48 AM
Despite responded, you are off-topic here. Please use blue [ EDIT ] button to move this thread to Other Network Infrastructure Subjects as it is more appropriate. Thank you.
Note that further CCNA questions should be placed in CCNA forum of learningnetworks.cisco.com
Also consider to use Google - for those question you may find many responses with no delay.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide