11-18-2003 12:58 PM - edited 03-02-2019 11:48 AM
hi can anyone guide me to replace an old ios image in a 1. read only and
2. read/write flash
in 2500 and 2600 routers
the problem is ive got some old ios runnin in them .. so i need the proper method to replace it with this new image . Thankyou..
11-24-2003 04:02 PM
The procedure to upgrade the IOS in a 2500 is as described at http://www.cisco.com/en/US/partner/products/hw/iad/ps497/products_tech_note09186a0080110d2c.shtml.
For the 2600, refer to
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_tech_note09186a00800f81f9.shtml
You could also refer to the technical documentation for more version specific upgrade details.
http://www.cisco.com/univercd/home/home.htm
