Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
844
Views
0
Helpful
11
Replies

Integrating IGX UXM with Router..

bala.kcs
Level 1
Level 1

‎07-28-2003 06:03 AM - edited ‎03-02-2019 09:09 AM

I have two sites Phoenix & Newberlin each having one IGX & Router. We have the T3 between the Routers. However between IGXs at Phoenix & Newberlin we are having only 2x T1s. Is there a work around such that I can connect my IGXs at Phoenix & newberlin to the local router so that my IGXs see each other via the Routers... If there is a work around, It would be really fantastic..

I know many of you would suggest to move the T3 back on the IGX and have Routers connected via IGX.. I need the otherway solution...

Can anyone Help me.

Labels:
0 Helpful
11 Replies 11

hbaerten
Level 4
Level 4

‎07-28-2003 11:45 PM

Supposing you have frame-relay connections (or are willing to implement FR), you could configure the routers as FR switches (or in hybrid mode).

See http://www.cisco.com/warp/customer/116/fr_faq.html#5

So if you then physically connect the IGX to the router, you can define a FR pvc (or multiple pvcs) from IGX to IGX via the routers.

hth

Herbert

0 Helpful