03-20-2003 02:48 PM - edited 03-02-2019 06:01 AM
We have a 2621 we recently upgraded to IOS 12.2 13T1. when we did we lost all communication with the serial interface of the router via snmp. We use snmp for monitoring and we can monitor the ethernet interfaces just fine but the serial interface is a no go.. and now we also have a new interface of Virtual Access i believe.. can anyone shed some light on what is going on and how to resolve it?
Thanks
03-21-2003 05:37 PM
Depending on what application you are using to monitor this device you might delete it's configuration and readd it to your snmp polling device. Your IfIndex # for your Serial interface might have changed due to the additional interfaces added, as you've mentioned.
virtual access interfaceInstance of a unique virtual interface that is created dynamically and exists temporarily. Virtual access interfaces can be created and configured differently by different applications, such as virtual profiles and virtual private dialup networks.
To delete this "clear interface virtual-access #" should remove this. Here's a link that talks about the Virtual access interfaces.
Hope this helps you,
Don
03-26-2003 06:13 AM
Ok i tried the clear in virtual-access 1 and it gave me please use virtual template to configure your virtual access
also i deleted and readded the device form the snmp software and it still does the same thing.. any more suggestions?
03-26-2003 07:14 AM
Ok i tried the clear in virtual-access 1 and it gave me please use virtual template to configure your virtual access
also i deleted and readded the device form the snmp software and it still does the same thing.. any more suggestions?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide