02-19-2014 01:38 AM - edited 03-03-2019 07:17 AM
hi all
i'm trying to make sync with linux ntp with cisco 3850 here is the what i did
linux centos 6.5 (on the ucs virtual machin) . this is a ntp server
ip 10.1.1.251
===================================================
For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
driftfile /var/lib/ntp/drift
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1
# Hosts on local network are less restricted.
restrict 10.1.1.0 mask 255.255.255.0 nomodify notrap
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html)
#server 1.centos.pool.ntp.org iburs
#server 2.centos.pool.ntp.org iburst
#server 3.centos.pool.ntp.org iburst
server 127.127.1.0
fudge 127.127.1.0 stratum 2
#broadcast 192.168.1.255 autokey # broadcast server
#broadcastclient # broadcast client
#broadcast 224.0.1.1 autokey # multicast server
#multicastclient 224.0.1.1 # multicast client
#manycastserver 239.255.254.254 # manycast server
#manycastclient 239.255.254.254 autokey # manycast client
# Enable public key cryptography.
#crypto
includefile /etc/ntp/crypto/pw
# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys
# Specify the key identifiers which are trusted.
#trustedkey 4 8 42
# Specify the key identifier to use with the ntpdc utility.
#requestkey 8
# Specify the key identifier to use with the ntpq utility.
#controlkey 8
# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
and cisco 3850 configured this one
ntp server 10.1.1.241
and
show ntp status
clock is unsynchronized, stratum 16, reference is null
why...didn't work.. somebody help me..
Solved! Go to Solution.
02-20-2014 01:28 PM
Is there a typo in your post or configuration? You show the NTP server IP address as 10.1.1.251, but the router configured to use 10.1.1.241.
Regards
02-20-2014 01:28 PM
Is there a typo in your post or configuration? You show the NTP server IP address as 10.1.1.251, but the router configured to use 10.1.1.241.
Regards
02-21-2014 01:06 AM
yeah.. thank you. actually i changed ntp.conf file and then working well
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide