One quick question. ( I hope this is easy). I would like to be able to load balance internet traffic on a Cisco 2621XM running IOS version 12.2(8)T5. My goal is the following:
Send 75% through 1 ISP and 25% to a second ISP.
What would be the commands to do this?
I'm not using any routing protocol.
Make up config can be like this:
Inside network: 192.168.1.0
Outside Interface of router S0/0: 126.96.36.199
Outside Interface of router S0/1: 188.8.131.52
Let us pretend that we want to send 75% of the traffic through serial S0/1 ip 184.108.40.206