log Loggin's to the Log

[b.ransom]

Need Help in directing logins to the log/syslog, etc

I have done the following:

Logging history infomational

Logging xxx.xxx.xxx.xxx

line aux 0

logging synchronous

logging level all

line con 0

logging synchronous

logging level all

thanks

[minie]

Logging history is only for the logging history table, and is only significant for enabling syslog trap. I did not see the logging level for server, or console. How doese "show logg" look like?

[b.ransom]

The sh Log is not showing any login info. I'm not even sure if the log will capture logins without a debug command running?

Syslog logging: enabled (0 messages dropped, 4 messages rate-limited, 0 flushes, 0 overruns)

Console logging: level debugging, 761 messages logged

Buffer logging: level debugging, 765 messages logged

Logging Exception size (8192 bytes)

Trap logging: level informational, 261 message lines logged

[minie]

You logging level is already debugging for console and buffer, the maximum info you can have. I don't think there's any syslog for console login. There's trap for telnet session though when you enable this.

snmp-server host 1.1.1.1 tty