02-21-2002 08:51 AM - edited 03-01-2019 08:35 PM
Hi,
I have a problem with one 5300. I use an application that opens a reverse telnet with the mica modems and then connect with a remote modem (with AT commands).
The problem is that the mica modems don´t seems to work in a transparent way and sometimes do not send some characters. How could I debug the characters that the modem are sending or receiving?
02-21-2002 10:52 AM
Try "debug modem mica tx slot/port" and
"deb modem mica rx slot/port"
Thanks,
Mak.
02-22-2002 12:24 AM
Thank, and do I need the "Modem Management Technology License" to use this command (I don´t have the 5300 here)?.
What is exactly this License?
02-22-2002 09:37 AM
Hi,
This is a hidden command, can execute on CLI...MMTL is basically a licence to use these modem ports...morally speaking one should have it.
Thanks,
Mak.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide