cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
742
Views
0
Helpful
1
Replies

multicast over dot1q trunk

mike.cunningham
Level 1
Level 1

I have three 6509 switches, two core devices with sup720's and one closet switch with a supII. I am using VLC media player as my test multicast sender / receiver. I am running pim sparse-dense mode with auto RP. My switch named EVEN is the RP (and VTP master). Even is connected to the closet switch over a routed connection, when running pim on all interfaces in the path VLC works great in either direction. My other core switch named ODD is connected to even over a dot1q trunk. I can't get multicast from the closet to ODD or ODD to the closet. ODD learns of VLAN 6 from EVEN. I created interface vlan6 on ODD and enabled pim (Also on for VLAN6 on even) but I still cannot pass multicast. What is the right way to do this? Thanks.

1 Reply 1

Roberto Salazar
Level 8
Level 8

check this link on "Multicast Quick-Start Configuration Guide":

http://www.cisco.com/en/US/tech/tk828/technologies_tech_note09186a0080094821.shtml

Hope it helps.