12-18-2001 08:28 AM - edited 03-01-2019 07:47 PM
Hello,
I would like to implement multicasting on my network. I've been reading white papers of the Cisco's website. Now I am a little confused with all that information. I've got two 5505s with RSMs at the core and then mixture of routers and switches. I would like to implement multicasting on 5505s and switches only. What would be the best protocol to use ICMP, CGMP, or ICMP snooping? Should I implement multicasing on my server farm switches?
Any information on multicasting including personal experience is more is welcome?
Thanks a lot.
01-03-2002 01:02 PM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
01-04-2002 10:44 AM
Start with IGMP on the switches, and PIM sparse-dense on the routers. There's a couple of Cisco Video on Demand (VOD) presentations about multicasting from Networkers 2001 that you may find useful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide