07-15-2022 04:30 PM
Good evening,
I'm trying to configure a 4351 to be a DNS server for some appliances and for some reason the "ip dns server" command doesn't come up:
(config)#ip ?
Global IP configuration subcommands:
access-list Named access-list
address-pool Specify default IP address pooling mechanism
alias Alias an IP address to a TCP port
arp IP ARP global configuration
as-path BGP autonomous system path filter
bgp-community format for BGP community
bootp Config BOOTP services
casa configure this router to participate in casa
cef Cisco Express Forwarding
classless Follow classless routing forwarding rules
community-list Add a community list entry
default-gateway Specify default gateway (if not routing IP)
default-network Flags networks as candidates for default routes
dhcp Configure DHCP server and relay parameters
dhcp-client Configure parameters for DHCP client operation
dhcp-relay Configure DHCP relay global parameters
dhcp-server Specify target DHCP server parameters
dhcp-sip Configure DHCP SIP global parameters
domain IP DNS Resolver
domain-list Domain name to complete unqualified host names.
domain-lookup Enable IP Domain Name System hostname translation
domain-name Define the default domain name
extcommunity-list Add a extended community list entry
finger finger server
forward-protocol Controls forwarding of physical and directed IP broadcasts
ftp FTP configuration commands
Please see licenses:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appx None None None
uc uck9 Permanent uck9
security None None None
ipbase ipbasek9 Permanent ipbasek9
Solved! Go to Solution.
07-17-2022 12:13 PM
Yup, sorry I'm late. I forgot to update my post with the fact I was able to do it after I upgraded to 16.9 which I was doing any to since they're upgrading to 12.5 SU5. I figured I upgrade and try again. Everything is working now.
07-16-2022 12:40 AM
Most of the router should able to configure,
can you post show version
07-16-2022 04:55 AM
Thank you for the reply Balaji.
The current version is: Version 15.5(2)S3, RELEASE SOFTWARE (fc2)
07-16-2022 05:46 AM
that should be working for 15.X code - show run (post full config - removing any security information) - also like to see show version (complete)
07-16-2022 08:08 AM
07-16-2022 12:00 PM
Hello,
according to the document linked below:
"Locally hosted DNS SRV entries are not supported until IOS-XE release 3.17S."
Which means you need at least that version for the CUBE to function as DNS server...
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book.pdf
07-17-2022 12:13 PM
Yup, sorry I'm late. I forgot to update my post with the fact I was able to do it after I upgraded to 16.9 which I was doing any to since they're upgrading to 12.5 SU5. I figured I upgrade and try again. Everything is working now.
07-19-2022 12:01 AM
Thank you for the input and glad you were able to make it work, yes some time some IOS codes have issues even 15.5. X different once have different requirements.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide