Hi Experts,
I am working on ASA cluster setup which is running mcast traffic. In my setup when start sending traffic i am seeing some extra routes in slave devices and after stopping all the traffic these routes are not getting removed.
Here is the output of mfib table from one of my slave device.
ASACluster/slave/ASA5585-C(config)# show mfib
Entry Flags: C - Directly Connected, S - Signal, IA - Inherit A flag,
AR - Activity Required, K - Keepalive
Forwarding Counts: Pkt Count/Pkts per second/Avg Pkt Size/Kbits per second
Other counts: Total/RPF failed/Other drops
Interface Flags: A - Accept, F - Forward, NS - Negate Signalling
IC - Internal Copy, NP - Not platform switched
SP - Signal Present
Interface Counts: FS Pkt Count/PS Pkt Count
(*,*) Flags: <<<<<<<<<< What does these route specify and also some times i see (S, *) routes what does it mean?
Forwarding: 0/0/0/0, Other: 0/0/0
(*,239.0.0.0/16) Flags: C K
Forwarding: 0/0/0/0, Other: 0/0/0
(*,239.20.0.0/16) Flags: C K
Forwarding: 0/0/0/0, Other: 0/0/0
(*,239.40.0.0/16) Flags: C K
Forwarding: 0/0/0/0, Other: 0/0/0
(*,239.255.115.107) Flags: C K
Forwarding: 0/0/0/0, Other: 0/0/0
management Flags: F NS
Pkts: 0/0
(*,239.255.255.250) Flags: C K
Forwarding: 0/0/0/0, Other: 0/0/0
management Flags: F NS
Pkts: 0/0
(*,239.255.255.254) Flags: C K
Forwarding: 0/0/0/0, Other: 0/0/0
management Flags: F NS
Pkts: 0/0
The above marked route is shown only in slave devices not in master device.
