I can not ping my phone extender 172.16.5.5 with this current setup.....why? The extender is connected to the switch and the 5.1 port is connected to the switch as well. I read about what is required to stack the HWICs but I am not doing that.
Building configuration...
Current configuration : 2749 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname SIVLFtoNOR
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
no logging console
enable secret xxxx
enable password xxxx
!
no network-clock-participate aim 0
no network-clock-participate aim 1
no aaa new-model
ip subnet-zero
!
!
ip cef
!
!
ip domain name hrtransit.org
no ftp-server write-enable
!
username xxxx privilege 15 secret xxxxx
!
!
!
interface FastEthernet0/0
description LAN Router Connection at Silver Leaf
ip address 172.x.x.x.255.255.0
duplex full
speed 100
!
interface FastEthernet0/1
description BU LAN Router Connection at Silver Leaf
ip address 192.168.16.16 255.255.252.0
duplex auto
speed auto
!
interface FastEthernet0/1/0
no ip address
duplex full
speed 100
!
interface FastEthernet0/1/1
no ip address
!
interface FastEthernet0/1/2
no ip address
!
interface FastEthernet0/1/3
no ip address
!
interface FastEthernet0/1/4
no ip address
!
interface FastEthernet0/1/5
no ip address
!
interface FastEthernet0/1/6
no ip address
!
interface FastEthernet0/1/7
no ip address
!
interface FastEthernet0/1/8
no ip address
!
interface Serial0/2/0
ip address 172.x.x.x.255.255.252
encapsulation ppp
!
interface Serial0/3/0
no ip address
clockrate 2000000
!
interface Serial0/3/1
no ip address
clockrate 2000000
!
interface Vlan1
description Silverleaf Switch
ip address 172.x.x.x.255.255.0
!
router rip
version 2
network 172.16.0.0
no auto-summary
!
ip default-gateway 172.16.5.1
ip classless
ip http server
ip http authentication local
ip http timeout-policy idle 5 life 86400 requests 10000
!
!
!
control-plane
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco".
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
login local
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet
line vty 5 15
privilege level 15
login local
transport input telnet
!
scheduler allocate 20000 1000
!
end
