cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3153
Views
5
Helpful
4
Replies

Nexus 9000 temperature Minor alarm

joseluis68
Beginner
Beginner

hello,

I have a Cisco Nexus 9000

 

sh environment temperature
Temperature:
--------------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
                        (Celsius)       (Celsius)    (Celsius)
--------------------------------------------------------------------
1 FRONT          70                 42             43            MinorAlarm
1 BACK            80                 70             42            Ok
1 CPU              90                 80             58            Ok
1 Homewood   110               90             56            Ok

 

Temperature in Front ranges between 41 and 43.

How can I change MinorThres (to 44)?

 

 

 

 

1 Accepted Solution

Accepted Solutions

Hi @joseluis68 

 

 


Creating a Supplemental Policy for the Temperature Threshold Event
This example shows how to create a supplemental policy using the event temperature command:

[no] event temperature [mod module-number] [sensor sensor-number] threshold {major | minor | any}

In addition to the default policy, this example shows how to execute the policy myappletname and action 1 if the temperature crosses the minor threshold on sensor 3 of module 2:

switch# configure terminal
switch(config)# event manager applet myappletname
switch(config-applet)# event temperature module 2 sensor 3 threshold minor
switch(config-applet)# action 1 cli “show environ temperature”
switch(config-applet)# end
 

 

this is the official page

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_eem_events_and_examples.html

 

remember to rate this answer as help

 

View solution in original post

4 Replies 4

Hi @joseluis68 

 

 


Creating a Supplemental Policy for the Temperature Threshold Event
This example shows how to create a supplemental policy using the event temperature command:

[no] event temperature [mod module-number] [sensor sensor-number] threshold {major | minor | any}

In addition to the default policy, this example shows how to execute the policy myappletname and action 1 if the temperature crosses the minor threshold on sensor 3 of module 2:

switch# configure terminal
switch(config)# event manager applet myappletname
switch(config-applet)# event temperature module 2 sensor 3 threshold minor
switch(config-applet)# action 1 cli “show environ temperature”
switch(config-applet)# end
 

 

this is the official page

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_eem_events_and_examples.html

 

remember to rate this answer as help

 

thanks for assistance provided @Javier Acuña 

Thanks for the help.

 

@joseluis68 estamos para servir.

 

Saludos cordiales.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: