We have a frame-relay PVC between 7506 in Main Office and 3660 in Branch Office with CIR of 1Mb. PVC utilization sometimes overcome CIR. We are testing frame relay payload compression with FRF9 standard to optimize PVC utilization.
Well, We have configured compression in both sides, all seems to work fine, 3660 sends compressed traffic to 7506, but I suspect that 7506 are sending all traffic uncompressed to 3660. This is Main Office show compress output :
Hssi5/0/0 - DLCI: 34
Software compression enabled
uncompressed bytes xmt/rcv 0/340233859
compressed bytes xmt/rcv 0/251035307
1 min avg ratio xmt/rcv 0.000/0.000
5 min avg ratio xmt/rcv 0.000/0.001
10 min avg ratio xmt/rcv 0.000/0.004
no bufs xmt 0 no bufs rcv 0
resyncs 154
Additional Stacker Stats:
Transmit bytes: Uncompressed = 0 Compressed = 0
Received bytes: Compressed = 239681739 Uncompressed = 0
And this is Branch Office show compress output:
Serial3/0 - DLCI: 16
Software compression enabled
uncompressed bytes xmt/rcv 364584299/0
1 min avg ratio xmt/rcv 0.000/0.000
5 min avg ratio xmt/rcv 0.000/0.000
10 min avg ratio xmt/rcv 0.000/0.000
no bufs xmt 0 no bufs rcv 0
resyncs 0
Additional Stacker Stats:
Transmit bytes: Uncompressed = 143473294 Compressed = 113371820
Received bytes: Compressed = 0 Uncompressed = 0
Anybody can help me with this issue? What´s wrong?
Thanks.
