It happens with different routers, but I've collected some data with a 3620 with this sh ver:
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.1(11), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Tue 02-Oct-01 21:40 by kellythw
Image text-base: 0x60008940, data-base: 0x608CE000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
as3620 uptime is 3 days, 16 hours, 53 minutes
System returned to ROM by reload at 20:10:17 MET Mon Jan 14 2002
System restarted at 20:10:57 MET Mon Jan 14 2002
System image file is "flash:c3620-i-mz.121-11.bin"
cisco 3620 (R4700) processor (revision 0x81) with 26624K/6144K bytes of memory.
Processor board ID 05110004
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
MICA-6DM Firmware: CP ver 2730 - 5/23/2001, SP ver 2730 - 5/23/2001.
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
16 Serial network interface(s)
30 terminal line(s)
2 Channelized E1/PRI port(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
I repost the configuration, still abridged (i.e. with password, tel numbers and many names removed):
Using 10161 out of 30712 bytes
!
! Last configuration change at 17:10:45 MET Mon Dec 17 2001
! NVRAM config last updated at 17:10:46 MET Mon Dec 17 2001
!
version 12.1
service timestamps debug datetime
service timestamps log datetime
service password-encryption
!
hostname as3620
!
logging buffered 4096 informational
enable secret 5 XXXXXXXXXXXXXXX
enable password 7 XXXXXXXXXXXXXXXXX
!
username netcenter password 7 XXXXXXXXXXXXXXXX
username bergonz password 7 XXXXXXXXXXX
! (more username deleted)
!
!
!
!
clock timezone MET 1
clock summer-time MET-DST recurring last Sun Mar 2:00 last Sun Oct 3:00
modem call-record terse
modem buffer-size 500
modem country mica italy
ip subnet-zero
ip domain-name internal.XXXXXXXXXXXX.it
ip name-server 172.23.1.121
ip name-server 172.23.1.16
!
ip address-pool local
isdn switch-type primary-net5
chat-script mica ABORT ERROR ABORT BUSY "" "ATZ" OK "ATDT \T" TIMEOUT 30 CONNECT
\c
!
controller E1 1/0
pri-group timeslots 1-16
!
controller E1 1/1
!
!
!
interface FastEthernet1/0
ip address 172.23.1.8 255.255.255.0
ip nat outside
no ip mroute-cache
speed auto
half-duplex
no cdp enable
!
interface Serial1/0:15
no ip address
encapsulation ppp
dialer pool-member 1 priority 255
isdn switch-type primary-net5
isdn incoming-voice modem
no cdp enable
ppp authentication chap
ppp chap hostname company
!
interface Group-Async1
ip unnumbered FastEthernet1/0
encapsulation ppp
dialer in-band
dialer pool-member 1
dialer pool-member 2
async mode dedicated
no cdp enable
ppp callback accept
ppp authentication chap
ppp chap hostname company
ppp ipcp accept-address
group-range 1 30
!
interface Dialer1
description Michele Bergonzoni, 0516781926, bergonz@labs.it
ip unnumbered FastEthernet1/0
encapsulation ppp
dialer pool 2
dialer remote-name bergonz
dialer idle-timeout 600 either
dialer enable-timeout 8
dialer-group 1
no peer default ip address
no cdp enable
ppp callback accept
ppp authentication chap
ppp ipcp dns 172.23.1.121
ppp ipcp wins 172.23.1.121
!
interface Dialer50
description Laboratori Fondazione G. Marconi - 0516781911 - bergonz@labs.it
ip unnumbered FastEthernet1/0
ip nat inside
encapsulation ppp
dialer pool 1
dialer remote-name netcenter
dialer string 051678NNNN
dialer caller 516781234
dialer-group 1
no cdp enable
ppp authentication chap
ppp chap password 7 XXXXXXXXXXXXXXX
!
! (more dialers deleted)
!(nat, routing, acls deleted)
dialer-list 1 protocol ip permit
no cdp run
!
snmp-server engineID local XXXXXXXXXXXXXXXXXXXXXXXX
snmp-server community public RO
!
line con 0
line 1 30
script callback mica
login local
modem InOut
transport input telnet
line aux 0
line vty 0 4
password 7 XXXXXXXXXXXXXX
login
!
ntp clock-period 17179647
ntp server 172.23.1.16
end
The user netcenter really has number 051678NNNN, while as you can see I've inserted dialer caller 516781234, which is just a fake. I remove the zero because in the italian telephone system the CLID has no zero, while the number you use to place the call must begin with zero.
This is the "debug isdn q931" and "debug dialer" output when doing a call as user netcenter from number 51678NNNN, which shoud not work but does. I've also obfuscated the called number with x's:
Jan 18 12:07:06: ISDN Se1/0:15: RX <- SETUP pd = 8 callref = 0x005B
Jan 18 12:07:06: Sending Complete
Jan 18 12:07:06: Bearer Capability i = 0x8890
Jan 18 12:07:06: Channel ID i = 0xA9838D
Jan 18 12:07:06: Calling Party Number i = 0x2183, '51678NNNN', Plan:ISDN
, Type:National
Jan 18 12:07:06: Called Party Number i = 0xA1, '51xxxxxxx', Plan:ISDN, T
ype:National
Jan 18 12:07:06: ISDN Se1/0:15: TX -> CALL_PROC pd = 8 callref = 0x805B
Jan 18 12:07:06: Channel ID i = 0xA9838D
Jan 18 12:07:06: %LINK-3-UPDOWN: Interface Serial1/0:12, changed state to up
Jan 18 12:07:06: ISDN Se1/0:15: TX -> CONNECT pd = 8 callref = 0x805B
Jan 18 12:07:06: Channel ID i = 0xA9838D
Jan 18 12:07:06: ISDN Se1/0:15: RX <- CONNECT_ACK pd = 8 callref = 0x005B
Jan 18 12:07:06: ISDN Se1/0:15: CALL_PROGRESS: CALL_CONNECTED call id 0x50, bcha
n 12, dsl 0
Jan 18 12:07:09: Se1/0:12: interface must be fifo queue, force fifo
Jan 18 12:07:09: %DIALER-6-BIND: Interface Se1/0:12 bound to profile Di50
Jan 18 12:07:09: Se1/0:12 DDR: dialer protocol up
Jan 18 12:07:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:12, c
hanged state to up
Jan 18 12:07:12: %ISDN-6-CONNECT: Interface Serial1/0:12 is now connected to 516
78NNNN netcenter
Hope this helps. Please don't hesitate to ask more details and debugs if needed.
Ragards,
Bergonz
