cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1007
Views
0
Helpful
1
Replies

PLUTO...KRIS..OAKLEY? While setting up a WRVS4400N

DrHappyRetupmoc
Level 1
Level 1

Below are sections of the logs sent by email from the router.  It ran all night and when I woke up there were 500+ email, mostly blocked content but the below sections were through out the logs. When I went to bed I was trying to get the latest firmware and signature file but was unable to login to cisco and figured I would try and today. Has anyone seen this or know what it is?    Any comments would be appreciated! Thanks for your time!  Dec 31 16:00:42  - download uses obsolete (PF_INET,SOCK_PACKET) Dec 31 16:00:43  - Kris Linux Driver:Version=v2.00 for CISCO's RVSR000,WRVS4400N & WRVS4400Nv2(Feb 18 2009:18:16:43) Dec 31 16:00:43  - ipsec0: no IPv6 routers present Dec 31 16:00:43  - Enable Tcp Connection Tracking Dec 31 16:00:43  - The Total Used Table Memory Size =0xFB4878  082K Dec 31 16:00:43  - Trying to free free IRQ16 Dec 31 16:00:43  - Trying to free free IRQ17 Dec 31 16:00:48  - Kris is unlocked Dec 31 16:00:48  - Reset IDP Engine!!! Dec 31 16:00:48  - The Total Used Table Memory Size =0xFB4878  082K Dec 31 16:00:48  - Enable DDOS Detection!! Dec 31 16:00:48  - Enable PortScan Detection!! Dec 31 16:00:48  - Enable IP Sweep Detection!! Dec 31 16:05:25  - Send out NTP request to time-nw.nist.gov Mar  2 05:57:48  - Receive NTP Reply from time-nw.nist.gov  ---------- Mar  2 06:12:22  - Configuration changed! Mar  2 06:12:24  - [Access Log]O UDP Packet - 192.168.xx9.xx7:65168 --> 209.18.47.62:53 Mar  2 06:12:25  - [Access Log]O UDP Packet - 192.168.xx9.xx7:56399  --> 209.18.47.61:53 Mar  2 06:12:32  - [VPN Log]: shutting down Mar  2 06:12:32  - IPSEC EVENT: KLIPS device ipsec0 shut down. Mar  2 06:12:33  - [VPN Log]: Starting Pluto (Openswan Version cvs2006Jan12_11:29:56 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR; Vendor ID OE@ECqImzhFD) Mar  2 06:12:33  - [VPN Log]: @(#) built on Aug 13 2009:02:39:00: Mar  2 06:12:33  - [VPN Log]: Setting NAT-Traversal port-4500 floating to on Mar  2 06:12:33  - [VPN Log]:    port floating activation criteria nat_t=1/port_fload=1 Mar  2 06:12:33  - [VPN Log]:   including NAT-Traversal patch (Version 0.6c) Mar  2 06:12:33  - [VPN Log]: ike_alg_register_enc(): Activating OAKLEY_AES_CBC: Ok (ret=0) Mar  2 06:12:33  - [VPN Log]: starting up 1 cryptographic helpers Mar  2 06:12:33  - [VPN Log]: started helper pid 92 (fd:5) Mar  2 06:12:33  - [VPN Log]: Using KLIPS IPsec interface code on 2.4.27-star Mar  2 06:12:33  - [VPN Log]: Changing to directory '/etc/ipsec.d/cacerts' Mar  2 06:12:33  - [VPN Log]: Changing to directory '/etc/ipsec.d/aacerts' Mar  2 06:12:33  - [VPN Log]: Changing to directory '/etc/ipsec.d/ocspcerts' Mar  2 06:12:33  - [VPN Log]: Changing to directory '/etc/ipsec.d/crls' Mar  2 06:12:33  - [VPN Log]:   Warning: empty directory --------------- Mar  2 06:06:19  - Kris Linux Driver:Version=v2.00 for CISCO's RVSR000,WRVS4400N & WRVS4400Nv2(Feb 18 2009:18:16:43) Mar  2 06:06:19  - ipsec0: no IPv6 routers present Mar  2 06:06:19  - [Access Log]O UDP Packet - 192.168.xx9.xx7:56399  --> 209.18.47.62:53 Mar  2 06:06:19  - Enable Tcp Connection Tracking Mar  2 06:06:19  - The Total Used Table Memory Size =0xFB4878  082K Mar  2 06:06:19  - Trying to free free IRQ16 Mar  2 06:06:19  - Trying to free free IRQ17 Mar  2 06:06:23  - Kris is unlocked Mar  2 06:06:23  - [Access Log]O UDP Packet - 192.168.xx9.xx7:56399 --> 209.18.47.61:53 Mar  2 06:06:23  - [Access Log]O UDP Packet - 192.168.xx9.xx7:52777 --> 209.18.47.62:53 Mar  2 06:06:23  - Reset IDP Engine!!! Mar  2 06:06:23  - The Total Used Table Memory Size =0xFB4878  082K Mar  2 06:06:23  - Enable DDOS Detection!! Mar  2 06:06:23  - Enable PortScan Detection!! Mar  2 06:06:23  - Enable IP Sweep Detection!!

1 Reply 1

mfgrandalski
Level 1
Level 1

Hi: Did you ever get an answer - "fix?"

My router:

Well established WRVS4400N, v2.0 and ISP signature 1.5, been running about 2 years.

About 2 weeks ago started logs sent by email from the router:

“download uses obsolete (PF_INET,SOCK_PACKET)”

Looked and looked but can’t see any changes or Internet solutions.

 

Help needed.

Thanks.

Matthew Grandalski

Instructor Cisco Network Academy, Sumter, SC., about 10 years.

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: