PPPoE with Dialer und Backup

[mgessner]

Hello everyone!

I'm trying to set up an 1721 with 1ENET and 1-BS/T.

The 1ENET is used to set up a PPPoE connection to your ISP. I need to configure the BRI/Dialer Interface to Backup the PPPoE-Connection.

The complete sceanrio looks like this:

PIX501 connected to 1721

1721 connected via 1ENET PPPoE to ISP

PIX501 connected via easyVPN to PIX515 OUTSIDE

1721 Dialer 2 connected to Router on PIX515 DMZ as Backup

I have found several Backup hints regaring ATM etc but no backing up pppoe (with dialer) ?!?!?!

Thanks in advance for any help!

Mike

[fmachoka]

dial backup concept is the same regaless of link type that is being backup (ATM, HDLC, Frame relay, ADSL, etc)

Below is more information on configuring Dial Backup.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a0080087225.html

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800dc823.html

using dialer watch

http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800872ed.html