01-02-2002 01:34 AM - edited 03-01-2019 07:53 PM
I have a catalyst 2950. I Created 3 VLAN 1,2,3 and F0/24 port as a trunk port. I Connected this port to a server but only user on VLAN 1 can access to server.
Pls help me to solve this problem .
Thanks in advanced
01-02-2002 02:53 AM
Have you configured the server NIC to support 802.1q encapsulation?
If not, the only native VLAN (VLAN1 default) users will communicate with the server.
HTH,
Milan
01-02-2002 05:23 PM
But, How to configure it if I use Windows NT/ 2000 with 3C905 Network Card ?
Thanks
01-03-2002 06:09 PM
3c905 NIC can't support 802.1q encapsulation
01-03-2002 11:46 PM
What NIC supported 802.1q encapsulation I can used ?
Pls recommend me
Thanks
01-07-2002 06:40 AM
Waht about the Intel E100B NIC. I believe this will
support 802.1q!
01-08-2002 06:49 PM
But how to configure
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide