02-04-2004 02:36 PM - edited 03-02-2019 01:22 PM
Two quick question:
1. Can C6500 Sup2 without MSFC run in native mode?
2. In IOS image what is the difference between Enterprise and IP image in C6500 context?
Thanks in advance.
02-04-2004 05:58 PM
I have the same question and have opened a TAC case.
02-09-2004 04:28 PM
Currently you can not run native IOS on the 6500 with out the MSFC.
For you second question you can get this information on CCO at http://www.cisco.com/go/fn
Looking at 12.1(13)E13 here are the differences between the Enterprise W/VIP and IP/IPX W/VIP shows that the unique to the enterprise image are:
Apollo Domain
Asynchronous Serial Traffic Over UDP
Banyan VINES
Banyan VINES over ISL
Banyan VINES SRTP
Bridge Control Protocol (BCP) Quality of Service (QoS)
Bridge Control Protocol (BCP) Support
Connection-Mode Network Service (CMNS)
DECNet V
Encrypted Kerberized Telnet
Ethernet over MPLS (EoMPLS) - IEEE 802.1q Tag Stacking
Ethernet over MPLS (EoMPLS) - Port-Based
Ethernet over MPLS (EoMPLS) - Protocol Tunneling
Frame Relay SVC Support (DTE)
Frame Relay Tunnel Switching
Kerberos V client support
Local Area Transport (LAT)
MPLS (Multiprotocol Label Switching)
MPLS Label Distribution Protocol (LDP)
NetBEUI over PPP (NBFCP)
NetWare Asynchronous Services Interface (NASI)
Pragmatic General Multicast (PGM)
Protocol Translation (PT)
Rate Queues for SVC's per sub-interface
SNMP Inform Request
SNMP Manager
TCP Intercept
TN3270
Virtual Templates for Protocol Translation
X.28 Emulation
XNS
XNS over ISL
Xremote
There are no features that are unique to the IP/IPX W/VIP image.
Hope this helps
Brian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide