RSKILL on 6500

[istefan]

Hi

I have problem with ressetin sessins on catalyst 6509 runing IOS Version 12.1(13).

I want to monitor and reset session on port 3/2.

This is my configuration.

monitor session 1 source interface Fa3/2

monitor session 1 destination interface Fa3/47

----------

interface FastEthernet3/2

no ip address

switchport

switchport access vlan 300

switchport mode access

!

------------------------------

interface FastEthernet3/47

description Monitorin port

no ip address

------------------------------

Monitorin is working fine but reset sesion doesen't work.

When I try on dirent Switch like c2950 rskill is working.

Can anybady help ?

[gmarogi]

You can disable monitoring by using 'no monitor session 1' command in your case. I am not sure whether you are talking about trying this with some other command.

[istefan]

No. I have IDS sensor and i want to block intruder. Let's say that Somebady want to go to ftp on some site. IDS will monitor that and I can say - Reset thiss session. I send RSKILL on that session. So no connection is establish.

It works on catalist 2950 but on catalyst 6509 not.