08-02-2003 06:09 PM - edited 03-02-2019 09:19 AM
Hi
I have problem with ressetin sessins on catalyst 6509 runing IOS Version 12.1(13).
I want to monitor and reset session on port 3/2.
This is my configuration.
monitor session 1 source interface Fa3/2
monitor session 1 destination interface Fa3/47
----------
interface FastEthernet3/2
no ip address
switchport
switchport access vlan 300
switchport mode access
!
------------------------------
interface FastEthernet3/47
description Monitorin port
no ip address
------------------------------
Monitorin is working fine but reset sesion doesen't work.
When I try on dirent Switch like c2950 rskill is working.
Can anybady help ?
08-07-2003 12:27 PM
You can disable monitoring by using 'no monitor session 1' command in your case. I am not sure whether you are talking about trying this with some other command.
08-30-2003 07:35 AM
No. I have IDS sensor and i want to block intruder. Let's say that Somebady want to go to ftp on some site. IDS will monitor that and I can say - Reset thiss session. I send RSKILL on that session. So no connection is establish.
It works on catalist 2950 but on catalyst 6509 not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide