02-28-2004 11:47 PM - edited 03-02-2019 01:55 PM
i am facing a big problem on my 6506 with sup eng 2 and msfc2 on it. ive implemented vlan using ospf but it seems like its very slow most especialy in logging in..users on the same network as servers dont experience the slowness on logging in but only the users on different vlans.
please help.
thanks a lot.
02-29-2004 01:16 AM
Hello,
are you using CatOS or IOS and which version ? Can you post your configuration ?
Regards,
Georg
03-01-2004 07:57 AM
hybrib....cat on switch and ios on msfc
03-01-2004 08:31 AM
THE SWITCH CONFIGURATION
set int sc0 192.168.1.250 255.255.255.0 vlan 100
set default gateway 192.168.1.1
set vlan 100 5/1
set vlan 200 5/2
set vtp mode transparent
THE MSFC CONFIGURATION
int vlan 100
ip address 192.168.1.1 255.255.255.0
ip ospf priority 0
int vlan 200
ip address 192.168.2.1 255.255.255.0
ip helper address 192.168.1.10
ip helper-address 192.168.1.11
ip ospf priority 0
router ospf 1
network 192.169.1.0 0.0.0.255 area 100
network 192.168.2.0 0.0.0.255 area 100
area 100 stub
ip route 0.0.0.0 0.0.0.0 192.168.2.254
02-29-2004 09:31 AM
Hi,
did u put in any acl's, If you have acl's check that the ports needed by windows authentication are permited. To test remove the acl's on the vlan or permit any any and check the response time.
Regards,
Vinod
03-01-2004 07:58 AM
theres no access-list yet
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide