cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
0
Helpful
6
Replies

SNMP configuration in 6006and 4006

abdulmajeed
Level 1
Level 1

Hai,

We had one 6006 and two 4006 with as many as 10 3548XL switches in our network. We are using a NNM with Ciscoworks2000 for managing the network. We have configured snmp in all switches and hubs in our network.

The problem is:

1. When I try to see the standard reports in ciscoworks2000, I am getting the reports for all catalyst 3548XL Switches. But the reports for 6006 and 4006 are displayed as NO RECORDS, CHECK WHETHER LOGGING IS ENABLE ON THE DEVICE.

2. The configuration done for snmp are

All traps are enable using command

set snmp trap enable all

Logging to the NMS is enabled with the command

set snmp trap X.X.X.X <CommunityName>

The community name I have given is RW community name. What else i have to do to enable logging.

thanz in advance